Pure Aluminum Powder
$0.00
Pure Aluminum Powder
| Product | Pure Aluminum Powder |
| CAS No. | 7429-90-5 |
| Appearance | Silvery White to Grayish Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al |
| Density | 2.7g/cm3 |
| Molecular Weight | 26.98g/mol |
| Product Codes | NCZ-DCY-311/25 |
Pure Aluminum Description:
Pure Aluminum Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing
Aluminum Powder Related Information :
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Pure Aluminum Powder
Pure aluminum powder refers to aluminum powder produced from just aluminum without the addition of other alloying elements. It exhibits low density, high thermal and electrical conductivity, ductility, excellent cOverview of Pure Aluminum Powder
Pure aluminum powder refers to aluminum powder produced from just aluminum without the addition of other alloying elements. It exhibits low density, high thermal and electrical conductivity, ductility, excellent corrosion resistance, and reflectivity.
Key features of pure aluminum powder include:
Unalloyed aluminum with 99%+ purity
Highly reactive with high affinity to oxygen
Low melting point and excellent thermal conductivity
Lightweight with density around 2.7 g/cc
Soft and ductile for deformation processing
Available in various particle sizes and morphologies
Pure aluminum powder is used for protective coatings, pyrotechnic compositions, fuel additives, 3D printing, and other applications requiring pure aluminum properties.
This article provides a comprehensive overview of properties, production methods, applications, specifications, and other details of pure aluminum powder.
Composition of Pure Aluminum Powder
Pure aluminum powder has the following typical composition:
| Element | Weight % |
| Aluminum (Al) | 99%+ |
| Iron (Fe) | 0.35% max |
| Silicon (Si) | 0.10% max |
| Copper (Cu) | 0.05% max |
| Zinc (Zn) | 0.07% max |
| Manganese (Mn) | 0.03% max |
| Magnesium (Mg) | 0.03% max |
| Chromium (Cr) | 0.03% max |
| Others (each) | 0.03% max |
| Others (total) | 0.10% max |
Properties of Pure Aluminum Powder
Pure aluminum powder exhibits the following properties:
| Property | Value |
| Density | 2.70 g/cm3 |
| Melting Point | 660°C |
| Thermal Conductivity | 237 W/m.K |
| Electrical Resistivity | 2.65 microhm-cm |
| Young’s Modulus | 70 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 90-115 MPa |
| Elongation | 8-25% |
| Mohs Hardness | 2.75 |
| Oxidation Resistance | Poor |
The low density and softness of aluminum powder make it easy to handle and process for various applications. It has excellent thermal and electrical conductivity. Oxidation resistance is poor and powders require protection from oxidation during storage and use.
Production Methods for Pure Aluminum Powder
There are different production processes used to make pure aluminum powder:
Atomization – Molten aluminum is broken into droplets using gas or water jets which solidify into powder. Gas atomized powder has spherical morphology.
Electrolysis – Aluminum is deposited in powder form from alumina electrolyte. Powder is spongy and irregular shaped.
Milling – Ball milling of aluminum flakes produces flake powders of various sizes and morphologies.
Chemical Methods – Reactions of aluminum compounds produce fine aluminum powders of high purity.
Atomization is the most common method while special techniques are used for ultrafine or nanoscale aluminum powders. Powder characteristics can be controlled by process parameters.
Applications of Pure Aluminum Powder
Pure aluminum powder is used in the following applications:
Protective Coatings – Thermal spray coatings to provide corrosion protection for steel surfaces.
Pyrotechnics – Powder fuel for pyrotechnic compositions due to high flammability.
Fuel Additive – Added to solid rocket propellants and explosives to improve energetic characteristics.
3D Printing – Used in selective laser sintering, direct metal laser sintering (DMLS) additive manufacturing processes.
Printing Inks – Used in conductive inks for printing of circuits, RFID tags, other electronics.
Pigments – Flake and atomized powders for paints, plastics, rubber and other coatings.
Electronics – Pure aluminum bonding wires, contacts, circuits requiring conductivity.
Welding – Used as aluminum powder filler material for welding components and repair.
Specifications of Pure Aluminum Powder
Pure aluminum powder is available under various specifications:
Particle Size: Ranging from 5-150 microns depending on application. Finer atomized powder for AM, coarser grade for coatings.
Purity: From 99% to 99.9% purity based on impurity limits for iron, silicon and other elements.
Morphology: Spherical, irregular and flake type particle shapes. Spherical powder has better flowability.
Coating: Partially oxygen passivated, uncoated and oil coated pure aluminum powders offered.
Grades: Commercial pure, very high purity and technical grades conforming to standards like ASTM B209.
Surface Area: Powder can be tailored as ultrafine nanoscale (up to 20 m2/g) to coarse grades.
Health and Safety When Handling Aluminum Powder
Pure aluminum powder poses some health and safety hazards:
Fine aluminum powder is highly flammable and explosive when suspended in air. Dust explosion risks must be mitigated.
Oxidation is a risk leading to loss of material. Storage in inert atmosphere is recommended.
Aluminum powder should not be heated or used near sparks or ignition sources.
Contact with skin or eyes may cause irritation. Use personal protective equipment.
Inhalation of fine aluminum powders may cause respiratory issues. Use appropriate ventilation and breathing protection.
Aluminum powder wastage and disposal must be handled carefully to avoid contamination.
Inspection and Testing of Aluminum Powder
To ensure quality standards, pure aluminum powder is tested for:
Chemical Composition – Inductively coupled plasma mass spectrometry and optical emission spectroscopy used to verify composition and purity.
Particle Size – Laser diffraction analysis, sieve testing as per ASTM B214 standard used for measurement of particle size distribution.
Morphology – Scanning electron microscopy used to examine shape and surface structure of powder particles.
Flow Rate – Determined as per ASTM B213 using Hall flowmeter funnel. Spherical powder has excellent flowability.
Apparent Density – Measured using gravimetric analysis or Scott volumeter as per ASTM B212.
Specific Surface Area – BET gas absorption method used for measurement of surface area per unit mass, especially for nanoscale powders.
Routine testing ensures consistency in aluminum powder quality and performance.
Comparison of Atomized and Sintered Aluminum Powder
Atomized and sintered aluminum powders differ in production method and properties:
| Parameter | Atomized Al Powder | Sintered Al Powder |
| Production Method | Gas or water atomization of molten aluminum | Compacting and sintering of aluminum powder |
| Particle Morphology | Spherical | Irregular, porous |
| Particle Size | 5 to 150 microns | Under 5 microns |
| Flowability | Excellent | Poor |
| Purity | 99 to 99.9% | Lower |
| Cost | Higher | Lower |
| Applications | Thermal spray, AM | Flash powder, explosives |
Atomized aluminum powder has more controlled characteristics preferred for coatings, AM, electronics. Sintered aluminum is used where ultrafine particle size is required despite lower purity.
FAQs
Q: What is pure aluminum powder used for?
A: Pure aluminum powder is used in protective coatings, pyrotechnics, fuel additives, 3D printing, conductive inks, pigments, welding filler, and other applications requiring unalloyed aluminum properties.
Q: What is the difference between atomized and milled aluminum powder?
A: Atomized aluminum powder has spherical morphology and controlled particle size distribution while milled flake powder has irregular shapes and broader distribution. Atomized powder has better flow and packing density.
Q: How is ultrafine aluminum powder produced?
A: Special production methods like exploding wire process, evaporation-condensation, and high-energy ball milling allow production of aluminum powder with particle sizes below 10 microns.
Q: What safety precautions are needed when handling aluminum powder?
A: Fine aluminum powder is highly flammable. Dust explosion risks must be controlled. Storage in inert gas is recommended. Use proper grounding, ventilation, and PPE when handling aluminum powder.
Q: How is the purity of aluminum powder determined?
A: Spectroscopic analysis like ICP-MS and OES is used to accurately quantify the elemental composition. Purity levels from 99% to 99.9% based on impurity elements like iron, silicon are specified.
Q: Where can I buy pure aluminum powder for electronics applications?
A: High purity aluminum powder with controlled particle size and low impurities suitable for electronics can be purchased from supplier.
Description
Description
Note: For pricing & ordering information, please get in touch with us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities and customization. E-mail: contact@nanochemazone.com
Customization:
If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) is available upon request.
NOTE:
Images, pictures, colors, particle sizes, purity, packing, descriptions, and specifications for the real and actual goods may differ. These are only used on the website for the purposes of reference, advertising, and portrayal. Please contact us via email at sales@nanochemazone.com or by phone at (+1 780 612 4177) if you have any questions.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
Al 3003 Powder
Al 3003 Powder
| Product | Al 3003 Powder |
| CAS No. | N/A |
| Appearance | Silver-Gray Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al-1.2Mn-0.12Cu |
| Density | 2.73g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-296/25 |
Al 3003 Description:
Al 3003 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricingAl 3003 Powder Related Information :
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. Al 3003 powder Al 3003 powder is an aluminum alloy powder composed mainly of aluminum and manganese. It belongs to the 3xxx series of aluminum alloys, which are known for their excellent workability and corrosion resistance. The powder form allows for easy handling and processing, making it suitable for various manufacturing techniques. Overview of Al 3003 Powder Al 3003 or 3A21 aluminum is a wrought alloy known for its good cold formability, weldability and corrosion resistance. The manganese additions enhance strength through solid solution strengthening while maintaining workability. Key characteristics of Al 3003 powder include: Moderate strength with good ductility Excellent formability and weldability Good corrosion resistance High thermal and electrical conductivity Low density Available in a range of powder sizes and shapes Al 3003 powder is used widely in chemical tanks, pipeline, automotive parts, heat exchangers, utensils, and other applications needing moderate strength, formability and corrosion resistance. Chemical Composition of Al 3003 Powder| Element | Weight % |
| Aluminum (Al) | Balance |
| Manganese (Mn) | 1.0-1.5% |
| Iron (Fe) | 0.7% max |
| Silicon (Si) | 0.6% max |
| Copper (Cu) | 0.05-0.20% |
| Zinc (Zn) | 0.10% max |
| Magnesium (Mg) | 0.10% max |
| Chromium (Cr) | 0.10% max |
| Property | Value |
| Density | 2.73 g/cm3 |
| Melting Point | 645-650°C |
| Thermal Conductivity | 180 W/mK |
| Electrical Conductivity | 43-44% IACS |
| Young’s Modulus | 68-72 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 145-185 MPa |
| Yield Strength | 110-140 MPa |
| Elongation | 12-20% |
| Hardness | 35-55 Brinell |
| Parameter | Al 3003 | Al 6061 |
| Alloy type | Non-heat treatable | Heat treatable |
| Mn content | 1.0-1.5% | 0.15% max |
| Mg content | 0.1% max | 0.8-1.2% |
| Strength | Moderate | Higher |
| Corrosion resistance | Good | Excellent |
| Weldability | Excellent | Good |
| Cost | Lower | Higher |
| Applications | Chemical tanks, utensils | Aerospace, automotive parts |
Al 6061 Powder
Al 6061 Powder
| Product | Al 6061 Powder |
| CAS No. | 7429-90-5 |
| Appearance | Silver-Gray Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al-Mg1SiC |
| Density | 2.7g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-300/25 |
Al 6061 Description:
Al 6061 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricingAl 6061 Powder Related Information :
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. Al 6061 powder for additive manufacturing (AM) Al 6061 powder is a versatile aluminum material composed of various elements to enhance its properties, such as strength, corrosion resistance, and machinability. It is widely used in different industries for its excellent characteristics. Overview of Al 6061 Powder Al 6061 is one of the most versatile heat treatable aluminum alloys. Magnesium and silicon additions allow it to be strengthened through precipitation hardening. The alloy has become immensely popular due to its excellent corrosion resistance, machinability, weldability and medium to high strength. Key characteristics of Al 6061 powder include: Medium to high strength with excellent ductility and toughness Excellent corrosion resistance and finishability Very good weldability and machinability High thermal and electrical conductivity Low density Available in a wide range of powder sizes and shapes Al 6061 powder is used widely for aerospace, marine, automotive, construction and general engineering applications needing lightweight and good mechanical properties. Chemical Composition of Al 6061 Powder The typical chemical composition of Al 6061 powder is:| Element | Weight % |
| Aluminum (Al) | Balance |
| Silicon (Si) | 0.4-0.8% |
| Iron (Fe) | 0-0.7% |
| Copper (Cu) | 0.15-0.4% |
| Manganese (Mn) | 0-0.15% |
| Magnesium (Mg) | 0.8-1.2% |
| Chromium (Cr) | 0.04-0.35% |
| Zinc (Zn) | 0-0.25% |
| Titanium (Ti) | 0-0.15% |
| Property | Value |
| Density | 2.7 g/cm3 |
| Melting Point | 582-652°C |
| Thermal Conductivity | 167 W/mK |
| Electrical Conductivity | 43-45% IACS |
| Young’s Modulus | 68-72 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 124-290 MPa |
| Yield Strength | 55-250 MPa |
| Elongation | 10-25% |
| Hardness | 40-95 Brinell |
| Parameter | Al 6061 | Al 7075 |
| Alloy type | Heat treatable | Heat treatable |
| Mg content | 0.8-1.2% | 2.1-2.9% |
| Strength | Medium | Very high |
| Machinability | Excellent | Poor |
| Weldability | Excellent | Poor |
| Corrosion resistance | Excellent | Good |
| Cost | Lower | Higher |
Al 7075 Powder
Al 7075 Powder
| Product | Al 7075 Powder |
| CAS No. | 7429-90-5 |
| Appearance | Gray Metallic Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al-5.6Zn-2.5Mg-1.6Cu |
| Density | 2.81g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-303/25 |
Al 7075 Description:
Al 7075 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricingAl 7075 Powder Related Information :
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. Al 7075 powder Al 7075 powder is a high-strength aluminum alloy composed primarily of aluminum, zinc, copper, and small amounts of magnesium and chromium. It is renowned for its impressive mechanical properties, making it an ideal choice for applications that require strength, durability, and lightweight characteristics. Al 7075 powder is typically produced through a process called atomization, where molten aluminum is sprayed and solidified into fine powder particles. Overview of Al 7075 Powder Al 7075 is one of the highest strength 7000 series aluminum alloys, offering strength superior to many steels. Zinc is the main alloying addition while magnesium imparts strength through precipitation hardening. Key properties of Al 7075 powder include: Exceptionally high tensile and yield strength High hardness and good fatigue strength Good toughness and moderate ductility Excellent finishing characteristics High corrosion resistance Available in range of powder sizes and shapes Al 7075 powder is ideal for high-performance aerospace and defense components needing the optimal combination of strength, hardness, fatigue resistance, and moderate weldability. Chemical Composition of Al 7075 Powder The typical chemical composition of Al 7075 powder is:| Element | Weight % |
| Aluminum (Al) | 87.1-91.4% |
| Zinc (Zn) | 5.1-6.1% |
| Magnesium (Mg) | 2.1-2.9% |
| Copper (Cu) | 1.2-2.0% |
| Iron (Fe) | 0-0.5% |
| Silicon (Si) | 0-0.4% |
| Manganese (Mn) | 0-0.3% |
| Chromium (Cr) | 0.18-0.28% |
| Titanium (Ti) | 0-0.2% |
| Property | Value |
| Density | 2.81 g/cm3 |
| Melting Point | 477–635°C |
| Thermal Conductivity | 130–210 W/mK |
| Electrical Conductivity | 22-30% IACS |
| Young’s Modulus | 71–72 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 570–635 MPa |
| Yield Strength | 505–570 MPa |
| Elongation | 7–10% |
| Hardness | 150–190 Brinell |
| Parameter | Al 7075 | Al 6061 |
| Alloy type | Heat treatable | Heat treatable |
| Zn content | 5.1-6.1% | 0% |
| Mg content | 2.1-2.9% | 0.8-1.2% |
| Strength | Much higher | Moderate |
| Machinability | Poor | Excellent |
| Weldability | Poor | Very good |
| Corrosion resistance | Moderate | Excellent |
| Cost | Higher | Lower |
AlSi10Mg Powder
AlSi10Mg Powder
| Product | AlSi10Mg Powder |
| CAS No. | 7429-90-5 |
| Appearance | Fine Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | AlS10Mg |
| Density | 2.67-2.7g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-305/25 |
AlSi10Mg Description:
AlSi10Mg Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricingAlSi10Mg Powder Related Information :
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. AlSi10Mg powder for SLM EBM 3D Printing AlSi10Mg powder is a composite material composed of aluminum (Al), silicon (Si), and magnesium (Mg). It is specifically designed for use in additive manufacturing processes, where it is used as a feedstock material for 3D printers.| Metal Powder | Size | Quantity | Price/kg | Size | Quantity | Price/kg |
| AlSi10Mg | 15-45μm | 1KG | 70 | 15-53μm | 1KG | 51 |
| 10KG | 42 | 10KG | 33 | |||
| 100KG | 34.6 | 100KG | 23.5 |
| Element | Weight % |
| Aluminum (Al) | Base/remainder |
| Silicon (Si) | 9-11% |
| Magnesium (Mg) | 0.2-0.45% |
| Other (Fe, Mn, etc.) | < 0.55% total |
| Element | Minimum wt% | Maximum wt% |
| Aluminum | Bal. | Bal. |
| Silicon | 9 | 11 |
| Magnesium | 0.2 | 0.45 |
| Other | – | 0.55 |
| Property | Typical Values |
| Density | 2.67 g/cc |
| Melting Point | ~615°C |
| Thermal Conductivity | 130 W/m-K |
| Electrical Resistivity | 4-8 x 10^-8 Ωm |
| Young’s Modulus | 70-80 GPa |
| Poisson’s Ratio | 0.33 |
| Yield Strength | 215-365 MPa |
| Tensile Strength | 330-430 MPa |
| Elongation | 8-10% |
| Hardness | 80-100 Brinell |
| Sector | Typical Applications |
| Aerospace | Turbine blades, structural brackets, rocket nozzles, satellites |
| Automotive | Powertrain, pistons, turbochargers, heat exchangers |
| Industrial | Robotics, tooling, jigs and fixtures |
| Medical | Orthopedic implants, prosthetics |
| General | Heat sinks, hydraulic manifolds, housings |
| Process | Heat Source | Description |
| SLM | Laser | Selective laser melting |
| DMLS | Laser | Direct metal laser sintering |
| EBM | Electron beam | Electron beam melting |
| Binder jetting | Liquid binder | Binder printed, then sintered |
| Cold spray | Kinetic | Powder sprayed onto substrate |
| Parameter | Typical Value | Role |
| Particle shape | Spherical >90% | Flowability, density |
| Particle size (μm) | 15-45 | Density, resolution |
| Flow rate (s/50g) | 23-27 | Powder bed packing |
| Apparent density (g/cc) | 1.2-1.6 | Recyclability |
| Tap density (g/cc) | 2.2-2.7 | Green density |
| Purity | >99.5% | Defect reduction |
| Oxygen (ppm) | <1000 | Clean melting |
AlSi12 Powder
AlSi12 Powder
| Product | AlSi12 Powder |
| CAS No. | 11145-27-0 |
| Appearance | Gray Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al88Si12 |
| Density | 2.7g/cm3 |
| Molecular Weight | 54.958g/mol |
| Product Codes | NCZ-DCY-304/25 |
AlSi12 Description:
AlSi12 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing AlSi12 Powder Related Information : Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. AlSi12 Powder AlSi12 powder is a fine-grained aluminum-silicon alloy powder commonly used in additive manufacturing processes. It is produced by atomization, which involves melting the alloy and rapidly cooling it to form small powder particles. The resulting powder exhibits excellent flowability and can be easily processed using various additive manufacturing techniques such as selective laser melting (SLM) and electron beam melting (EBM). Overview of AlSi12 Powder AlSi12 or A413 is an aluminum casting alloy with relatively high silicon content. The addition of 12% silicon results in good wear resistance, low coefficient of thermal expansion, and high thermal conductivity. Key properties of AlSi12 powder include: Good strength and hardness Excellent wear resistance Good dimensional stability High thermal conductivity Good machinability and polishability Low specific gravity Available in various particle size distributions AlSi12 is used for producing cylinder liners, piston rings, rocker arms, connecting rods, parts requiring heat and wear resistance. The powder metallurgy approach enables complex geometries. Composition of AlSi12 Powder The typical composition of AlSi12 powder is:| Element | Weight % |
| Aluminum (Al) | Balance |
| Silicon (Si) | 11-13% |
| Copper (Cu) | <1% |
| Magnesium (Mg) | <1% |
| Iron (Fe) | <1% |
| Manganese (Mn) | <1% |
| Zinc (Zn) | <1% |
| Nickel (Ni) | <0.5% |
| Property | Value |
| Density | 2.7 g/cc |
| Melting Point | 560°C |
| Thermal Conductivity | 150-180 W/mK |
| Electrical Resistivity | 4-6 μΩ.cm |
| Young’s Modulus | 80-90 GPa |
| Poisson’s Ratio | 0.33 |
| Tensile Strength | 240-300 MPa |
| Compressive Strength | 600-650 MPa |
| Elongation | 3-5% |
| Hardness | 80-90 Brinell |
| Parameter | AlSi12 Powder | AlSi10Mg Powder |
| Alloy type | Cast alloy | Wrought alloy |
| Si content | 11-13% | 9-11% |
| Mg content | <1% | 0.2-0.5% |
| Strength | Higher | Lower |
| Wear resistance | Excellent | Good |
| Corrosion resistance | Moderate | Excellent |
| Machineability | Very good | Moderate |
| Applications | Wear parts, thermal management | Aerospace, marine parts |
| Cost | Lower | Higher |
AlSiCu Powder
AlSiCu Powder
| Product | AlSiCu Powder |
| CAS No. | N/A |
| Appearance | Silvery-White Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al-Si-Cu |
| Density | 2.68g/cm3 |
| Molecular Weight | N/A |
| Product Codes | NCZ-DCY-308/25 |
AlSiCu Description:
AlSi50 Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricingAlSiCu Powder Related Information :
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. AlSiCu Powder(AlSi10) AlSi10 is an aluminum alloy powder containing 10% silicon and remainder aluminum. It offers an excellent combination of strength, low density, thermal properties, corrosion resistance and weldability. AlSi10 is an aluminum alloy powder containing 10% silicon and remainder aluminum. It offers an excellent combination of strength, low density, thermal properties, corrosion resistance and weldability. AlSi10 Powder Composition The typical composition of AlSi10 alloy powder is:| Element | Composition |
| Aluminum (Al) | Balance |
| Silicon (Si) | 9-11% |
| Property | Value |
| Density | 2.7 g/cm3 |
| Melting Point | ~600°C |
| Thermal Conductivity | 150-180 W/m-K |
| Electrical Conductivity | 35-40% IACS |
| Coefficient of Thermal Expansion | 21-23 x 10<sup>-6</sup> /°C |
| Modulus of Elasticity | 80-85 GPa |
| Tensile Strength | 240-300 MPa |
| Elongation | 1-5% |
| Hardness | 80-90 Brinell |
| Corrosion Resistance | Excellent |
| Applications | Benefits |
| Aerospace components | Low density combined with high strength. |
| Automotive parts | Weight reduction without compromising mechanical performance. |
| Electronic housings | Thermal management for heat dissipation combined with low weight. |
| Medical implants | Biocompatible, non-toxic, corrosion resistant. |
| Thermal management | High thermal conductivity to dissipate heat. |
| Parameter | Options |
| Particle size | 5-150 microns |
| Particle shape | Spherical, irregular |
| Apparent density | Up to 2.7 g/cm3 |
| Flow rate | Up to 25 s/50g |
| Purity | Up to 99.7% |
| Alloy variants | AlSi12, AlSi5 |
| Method | Benefits |
| Additive manufacturing | Excellent geometric freedom for complex shapes. |
| Metal injection molding | High precision net shape capability. |
| Pressing and sintering | Economical for high volume simpler geometries. |
| Extrusion | Continuous production of rods and tubes. |
| Isostatic pressing | Achieves full density and improves properties. |
| Heat Treatment | Details | Purpose |
| Solutionizing | 530-550°C, quench | Dissolve soluble phases |
| Artificial Aging | 150-180°C, 5-10 hrs | Precipitation hardening |
| Annealing | 350°C, slow cooling | Restores ductility |
| Alloy | AlSi10 | AlSi12 | Al6061 | Al7075 |
| Strength | High | Highest | Medium | Very High |
| Weldability | Excellent | Poor | Good | Poor |
| Corrosion Resistance | Excellent | Excellent | Excellent | Good |
| Thermal Conductivity | High | Medium | Medium | Low |
| Density | Low | Low | Low | Low |
| Cost | Low | High | Medium | High |
| Manufacturer | Country |
| Hoeganaes Corporation | USA |
| Sandvik Osprey | UK |
| CNPC Powder | China |
| Rio Tinto Metal Powders | Canada |
| Toyal America | USA |
| ECKA Granules | Germany |
| Hazard | Precautions | PPE |
| Skin/eye contact | Avoid direct contact. Rinse if exposed. | Gloves, goggles |
| Inhalation | Avoid breathing dust. Ensure ventilation. | Respirator |
| Ingestion | Avoid hand-mouth transfer. Wash hands. | – |
| Fire | Use sand. Do not use water. | Protective gear |
| Parameter | Method | Specification |
| Chemical composition | OES, XRF, wet chemistry | Conformance to Al, Si, Mg content |
| Particle size distribution | Laser diffraction, sieving | D10, D50, D90 within range |
| Powder morphology | SEM imaging | Spherical shape and flowability |
| Apparent density | Hall flowmeter test | Minimum specified density |
| Flow rate | Hall flow meter test | Maximum flow seconds |
| Impurity levels | ICP or LECO analysis | Low oxygen, moisture content |
Aluminum Alloy Powder
Aluminum Alloy Powder
| Product | Aluminum Alloy Powder |
| CAS No. | 7429-90-5 |
| Appearance | Silvery-White Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al |
| Density | 2.6-2.8g/cm3 |
| Molecular Weight | 26.98g/mol |
| Product Codes | NCZ-DCY-310/25 |
Aluminum Alloy Description:
Aluminum Alloy Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricing Aluminum Alloy Powder Related Information : Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. Aluminum alloy series The aluminum alloy family is a family of materials with a variety of unique properties and areas of application. Their characteristics mainly depend on the alloying elements contained in them and their proportions. These ranges offer a wide range of opportunities to meet the needs of different industries. Let’s explore the features and typical applications of each series to better understand how to choose the best aluminum alloy material for your project.| Product | Specification | Apparent Density | Flow Ability | Oxygen Content | Tensile Strength | Yield Strength | Elongation |
| AISi10Mg | 15-53µm 45-105µm 75-150µm | ≥1.35g/cm³ | ≤80s/50g | ≤300ppm | 300±20Mpa | 200±20Mpa | 20±2% |
| AMgScZr | ≥1.30g/cm³ | ≤80s/50g | ≤300ppm | 545±20Mpa | 500±20Mpa | 10±2% | |
| AK400 (can be anodized) | ≥1.30g/cm³ | ≤80s/50g | ≤300ppm | 430±20Mpa | 300±20Mpa | 10±2% | |
| Pure aluminum powder (purity 99.8%) | ≥1.20g/cm³ | ≤100s/50g | ≤1000ppm | \ | \ |
Pure Aluminum Powder
Pure Aluminum Powder
| Product | Pure Aluminum Powder |
| CAS No. | 7429-90-5 |
| Appearance | Silvery White to Grayish Powder |
| Purity | ≥99%, ≥99.9%, ≥95%(Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | Al |
| Density | 2.7g/cm3 |
| Molecular Weight | 26.98g/mol |
| Product Codes | NCZ-DCY-313/25 |
Pure Aluminum Description:
Pure Aluminum Powder is one of the numerous advanced ceramic materials manufactured by Nanochemazone. Nanochemazone produces too many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information are available. Please request a quote above for more information on lead time and pricingAluminum Powder Related Information :
Storage Conditions: Airtight sealed, avoid light and keep dry at room temperature. Please contact us for customization and price inquiry Email: contact@nanochemazone.com Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters. Pure aluminum powder Pure aluminum powder contains 99% or higher aluminum content. It provides low density combined with good ductility, conductivity, and corrosion resistance. Overview of Pure Aluminum Powder Pure aluminum powder contains 99% or higher aluminum content. It provides low density combined with good ductility, conductivity, and corrosion resistance. Key properties and advantages of pure aluminum powder include: Pure Aluminum Powder Properties and Characteristics| Properties | Details |
| Composition | 99% or higher Al content |
| Density | 2.7 g/cc |
| Particle shape | Spherical, irregular |
| Size range | 1-150 microns |
| Apparent density | Up to 50% of true density |
| Conductivity | Excellent electrical and thermal conductivity |
| Corrosion resistance | Good due to protective oxide layer |
| Element | Weight % |
| Aluminum (Al) | 99% min |
| Silicon (Si) | 0.5% max |
| Iron (Fe) | 0.5% max |
| Copper (Cu) | 0.05% max |
| Manganese (Mn) | 0.05% max |
| Magnesium (Mg) | 0.05% max |
| Other impurities | 0.05% max |
| Property | Values |
| Density | 2.7 g/cc |
| Melting point | 660°C |
| Thermal conductivity | 237 W/mK |
| Electrical resistivity | 2.65 μΩ-cm |
| CTE | 23.1 x 10^-6 /K |
| Reflectivity | 87% at 400 nm wavelength |
| Property | Values |
| Tensile strength | 90-100 MPa |
| Yield strength | 35-45 MPa |
| Elongation | 35-40% |
| Hardness | 25-35 HB |
| Fatigue strength | 50-90 MPa |
| Shear strength | 60-65 MPa |
| Industry | Uses |
| Thermite welding | Rail welding, metal joining |
| Additive manufacturing | Low strength components |
| Explosives and pyrotechnics | Thermite compositions |
| Powder coatings | Conductive and resistant coatings |
| Diamond tools | Metal matrix with diamond particles |
| Fireworks | Fuel and pyrotechnic compositions |
| Standard | Description |
| ASTM B787 | Standard for pure aluminum powders |
| ASTM B859 | Specs for aluminum and aluminum alloy powders |
| DIN 1718-1 | Designation system for aluminum and aluminum alloys |
| GJB320B | Chinese military standard for aluminum and aluminum alloy powders |
| Size | Characteristics |
| 1-10 microns | Ultrafine grade used in printing pastes |
| 10-45 microns | Fine grade suitable for coatings, pressing |
| 45-150 microns | Coarse grade offers better flowability |
| Apparent Density | Details |
| Up to 50% of true density | For irregular morphology powder |
| 1.3-1.7 g/cc | Higher for spherical powder |
| Method | Details |
| Atomization | Molten aluminum stream broken into fine droplets that solidify into powder |
| Ball milling | Mechanical milling classifies coarse powder into fine powder |
| Annealing | Removes internal stresses and improves powder compressibility |
| Sieving | Classifies powder into different size fractions |
| Recommendation | Reason |
| Use proper ventilation | Avoid concentrated dust environment |
| Employ grounding systems | Prevent static discharge during handling |
| Limit moisture exposure | Prevents oxidation of particles |
| Follow safe protocols | Reduce health and fire hazards |
| Avoid ignition sources | Flammable powder risk |
| Use non-sparking tools | Prevent possibility of ignition |
| Test | Details |
| Chemical analysis | XRF or ICP testing verifies composition |
| Particle size distribution | Laser diffraction analysis |
| Apparent density | Hall flowmeter test per ASTM B212 standard |
| Powder morphology | SEM imaging of particle shape |
| Flow rate analysis | Gravity flow rate through specified funnel |
| Moisture measurement | Loss on drying test |
| Parameter | Pure Al | Al-Mg |
| Density | 2.7 g/cc | 2.7 g/cc |
| Strength | 90-100 MPa | 150-220 MPa |
| Conductivity | Excellent | Good |
| Corrosion resistance | Good | Excellent |
| Cost | Low | High |
| Uses | Thermite welding, pyrotechnics | Structural components |
Reviews
There are no reviews yet.